Hybrid Moto Rack – 2 Bike System

Love the hybrid rack. Can load up my dirt bike easily. Also allows me to attach my MTB rack as well (this rack clamps down on the front wheel). Adjustability is awesome. Helps to further stabilize the front of the truck bed.

Works perfect. The ability to adjust your chalks and move them as needed is clutch. Holds my dirtbike, electric dirtbike, and fat tire e bikes. Great quality and price

Micro easily installed in R1T. Just needed different bolts that could thread into the stock bed mounting holes.

Happily and solidly holding a 460lb Transalp.

I purchased the micro sized hybrid rack for my rivian and its AMAZING. Couldn't work better, and leaves enough room to use my manual bed cover over it. Couldn't reccomend it enough for hauling bikes.

First off, Chris, the owner, is fantastic. Reached out to help answer questions and helped me pull the trigger.

I installed the hybrid system on a ‘22 Ram 1500 with 5’7” bed. I have a BAKFLIP MX4 tonneau cover that have installed day to day. I ordered the full size 60” rack but realized that to avoid any potential issues with the bed cover hardware and the rack that I needed to move the bar down lower on the bulkhead instead of installing at the top. I was able to cut the bar but to avoid issue I would recommend the Mid size 57” bar if you want to move the bar down lower on the Ram beds due to the shape of the bulkhead. Install was easy, just be careful when drilling. If you have a 5’7” bed and want to run a tonneau like the Bakflip MX4, just be aware that with the 3rd bike extender and tonneau installed you will not be able to run a bed extender as the back wheel will be too far back. Overall, the rack is solid and nothing beats loading up hassle free and fast, and not having to worry about the bikes moving around in the bed at all around turns or when you’re on dirt roads. Would purchase again 100%!

Got the 48 inch for my 2023 Ford Maverick and love it! Pretty easy install, only issue was that the rivet tool bottomed out so I had to put a few washers on the bolt head side because the non threaded portion of the bolt would bottom out and not get the rivet fully expanded on my application. Other than that this thing is LEGIT!

I chose the Hybrid over the BB because it allowed me to mount it under the raised area of my truck bed. Center tie down loop on the BB would not have allowed this on my F150.
For reference I mounted it 14.5" to center. Installation was easy using the supplied hardware. I plan to use this for my dirt and street bikes with 21", 19" and 17" wheel sizes. 14.5" worked for all three sizes. Would have given this 5 stars but it arrived with scratches on the channel, the box it was shipped in was not damaged. I was not too concerned, applied a couple of coats of rattle can paint and called it good. Side note: I like that it blends with the truck bed and looks like it was meant to be there.

My riding spot has been closed a few weeks now from storm damage so unfortunately I haven't gotten to try the rack out yet.
But the install was pretty simple if you know how to use a drill and a couple hand tools.
The construction of the rail seems solid, and I love that I can move all the tie down hooks and wheel chocks to wherever I need them to be. Visually it looks great in the back of my '15 Tacoma too.
Really can't wait to get riding again and put the rack to the test.
Also good customer service from ccrsport as they called me to verify my shipping address and then shipped the rack out right away. A++

This is a great product. The instructions and hardware are top notch. I installed it in a 2017 F250 that does not have room for a nut on the cab side of the bed. The kit provided solves the problem and it's a clean installation.

The Hybrid Moto Rack is such an easy way to secure motorcycles in my Rivian truck. If I can do it, anybody can.

Absolutely Perfect!

nice quality! well made! you can tell, easy install, made a nice motorcycle hauler with a wood sided trailer, A+

The part is super high quality. Perfect for my cross country haul of my Triumph and KTM.

The Hybrid rack will not work on my GMC with a Backflip tonneau cover. I am bummed because this is a well made American item. The hardtop cover folds up and sticks out 6.5" from the bed and the only way to make this work is with the optional 3rd bike support, 2-3 times. I had hoped to use this for quick day trips, but will go back to stuffing the bike sideways in my truck, or continue to use my 16' enclosed trailer. It would be nice if I had known this prior to purchasing, but I can't assume CCR had seen every application. I guess I will offer someone a smoking deal on a new Hybrid Rack.

This is my second CCR Sport rack. I've had one on my Tacoma for years and have used it to mainly haul dirt bikes, but everything from Harleys and sport bikes as well. The ability to easily and quickly change wheel chock positions is awesome. I just bought another Hybrid Rack for a new utility trailer I'm building out for bike hauling, and the CCR option was a no brainer. One thing I like about the rail itself is that it's not predrilled for mounting holes, making it nice, easy, and clean to mount it to a custom application. Another super convenient thing is the scored center line to position your drill holes accurately - great feature there. As far as everything else goes, the tie down mounts are nice and sturdy (same as my older ones), but what I've yet to really test the longevity of is the new wheel chock vice design. I love my older gen metal ones, but seems those have been discontinued in favor of the newer style polymer ones. I'm sure the durability is there, but you just now have to potentially adjust both sides when changing configuration or placement instead of just the one before - not a big deal honestly. But what I do like about this new wheel chock design is that it sits flush with the bar as opposed to extending past, so kudos for that. All in all, I'd totally recommend these CCR products to anyone looking for a affordable and durable (and tax free) solution to conveniently haul your motorcycles. I know I've already sold three buddies on it in the past. Five stars.

Should have saw this long time ago. keeps my bike stable and strap point is so convenient. i dont need to reach far down my bed and strap my bike's the hard way. i highly recommend it.

The product was shipped fast ,and the Build quality is very good , makes securing bikes easy ,

All good , no issues

Quality components, low profile and good looking, strong, flexible configuration a big plus, easy install. Well thought out design. Love that it's made in USA. Customer support as good as it gets. A bit pricy, yes, but I love my truck and I love my bikes so it made sense for me.